TRIMEC 7 Series controller

The TRIMEC 7 Series controller are all full intelligent and can be used in a standalone or networked configuration. Programming is done via PC, however once progamming has been completed the PC ca be removed and only connected wheen additional programming is required or the event buffer needs to be uploaded te the PC.

The TRIMEC 7 Series controllers have a RS-232 port for direct connection to a PC and an RS-485 port for longer range connection. All TRIMEC 7 Series  controller for bidirectional door have a REX input for remote control.

สเปค
  • Support up to 30.000 Cardholders
  • Support up to 13.000 event in offline mode
  • Support Wiegand data format between 24 and 72 bits, also compatible with ABA (track two)
  • Support TCP/IP to allow the system to be used across Local Area Networks (LAN) and Wide Area Networks (WAN)
  • Can Connect up to 127controller using RS-485
  • Support multi format raeders (for example: EM, MIFARE, HID Prox, HID iClass,Indala and Biometric)
  • Delivered in mild steel cabinet complete with 230-16V AC shielded Transformer, Fuse block, 12V 2A DC regulated power supply and cabinet lock.
  • 5 years Lithium cell for maintaining memory and real time clock.
  • Data can be stored up to go days without power.

    •  

    Available Models:

    7-1-2 (Support 1 Door, one or Two directions)

    Inputs and Outputs:

    • 2 x Reader Inputs: TTL level, 12V DC, 150mA
    • 1 x Exit Button Input: Normally Open (N.O)
    • 1 x Door Sensor Input: Normally Closed
    • 3 x Auxiliary inputs:Normally Open (N.O)
    • 1 x Lock Output: Normally Closed (N.C) or Normally Open (N.O)
    • 2 x Auxiliary Outputs: Normally Closed (N.C) or Normally Open (N.O)

    Controller Board Dimensions 165mm x 112mm x 25mm


    7-2-2 (Support 2 Doors, one direction only)

    Inputs and Outputs:

    • 2 x Reader Inputs: TTL level, 12V DC, 150mA
    • 2 x Exit Button Inputs: Normally Open (N.O)
    • 2 x Door Sensor Inputs: Normally Closed
    • 4 x Auxiliary inputs:Normally Open (N.O)
    • 2 x Lock Output: Normally Closed (N.C) or Normally Open (N.O)
    • 2 x Auxiliary Outputs: Normally Closed (N.C) or Normally Open (N.O)

    Controller Board Dimensions 165mm x 112mm x 25mm


    7-4-4 (Support 4 Door, one or direction only)

    Inputs and Outputs:

    • 4 x Reader Inputs: TTL level, 12V DC, 150mA
    • 4 x Exit Button Input: Normally Open (N.O)
    • 4 x Door Sensor Input: Normally Closed
    • 2 x Auxiliary inputs:Normally Open (N.O)
    • 4 x Lock Output: Normally Closed (N.C) or Normally Open (N.O)
    • 2 x Auxiliary Outputs: Normally Closed (N.C) or Normally Open (N.O)

    Controller Board Dimensions 165mm x 112mm x 25mm


    7-4-8 (Support 4 Door, one or Two directions)

    Inputs and Outputs:

    • 4 x Reader Inputs: TTL level, 12V DC, 150mA
    • 4 x Exit Button Input: Normally Open (N.O)
    • 4 x Door Sensor Input: Normally Closed
    • 4 x Auxiliary inputs:Normally Open (N.O)
    • 4 x Lock Output: Normally Closed (N.C) or Normally Open (N.O)
    • 4 x Auxiliary Outputs: Normally Closed (N.C) or Normally Open (N.O)

    Controller Board Dimensions 165mm x 112mm x 25mm


     

    Close